Live Riverton listings, filtered
Townhomes in Riverton.
Every home listed as a townhome on the Riverton market, fed straight from the MLS and sorted newest first, with a clear read on the lower-maintenance way into a southwest-valley suburb where the detached stock runs higher.
This page's filter
- Filter
- Townhome
- Area
- Riverton, UT
- Sort
- Newest first
- Feed
- Local MLS, live
Want it narrower? Tell me your exact spec.
Newest first
The newest townhome listings.
Fed straight from the local MLS and filtered to attached townhome product: new Riverton listings appear here as they list, and sold homes drop off. The read on where the townhomes concentrate is just below.
Buying here
Weigh Mountain View Village against the floor plan.
A Riverton townhome trades yard and shared-wall privacy for a shorter walk to the shops, restaurants, and theater at Mountain View Village. Tell me your budget and what matters more, location or layout, and I will have the Riverton-area partner agent I work with flag the next listing that fits.
Selling here
Selling a Riverton townhome?
Buyers on this page are searching specifically for attached, lower-maintenance homes near Mountain View Village. List with the Riverton-area partner agent I connect you with and get featured on that exact search.
Listing information comes from the local MLS and is deemed reliable but not guaranteed.
The local read
What buying a townhome means in Riverton.
Riverton reads as a single-family city. The hub sorts it into three bands running with its north-south roads, and the housing is overwhelmingly detached: older larger-lot homes on the east side near the Jordan River, the big 1990s-2000s subdivision band through the center, and the newest product on the west bench out toward the Mountain View Corridor. The townhome is the exception to that pattern, and it lives almost entirely in that last band. The denser single-family and attached product clusters on the new west bench near Mountain View Village at 13400 South, where the former farm fringe turned into roughly a million square feet of open-air retail in about five years.
That location is the whole pitch for a Riverton townhome. You trade the yard and the shared walls for a lower-maintenance, lower-cost way into one of the most in-demand corners of the southwest valley, with a Harmons, a 14-screen Cinemark, and 50-plus shops and restaurants a short distance from the door. The typical Riverton home value has recently sat around $592,700 (U.S. Census ACS 2020-2024), and that number is anchored by detached houses on full lots. An attached townhome is usually the more reachable entry point under that figure, which is why the homes under $550,000 and homes under $650,000 pages overlap heavily with the townhome stock.
Financing an attached home is not identical to financing a detached one, and that is worth knowing before you fall for a floor plan. Lenders and loan programs look at attached-product projects differently from a standalone house, and the project itself can affect which loans are available and how the appraisal comes together. This is general, and it is exactly the kind of thing I stay on the file to sort out: I keep the financing side moving while the local partner agent works the streets. The mechanics vary by project and by program, so the honest answer is that we look at the specific building together rather than assume.
The trade-offs are real and worth saying plainly. A townhome means shared walls with neighbors on one or both sides, little to no private yard, and exterior and grounds upkeep handled at the project level rather than by you, which is the lock-and-leave appeal and the loss of control at the same time. If what you actually want is a freestanding home with no shared walls and no project-level rules, the single-story homes and homes without an association pages are the better starting points. Earlier in the process than show me listings? Start with the Riverton guide for the whole picture, and when a home below reads right, that is the moment to reach out.
What counts as a townhome here
-
Attached, side by side: a townhome shares one or both side walls with the next unit and usually runs two or three levels. Most of Riverton's attached product is newer and sits on the west bench near the Mountain View Corridor.
-
Little to no private yard: the trade for lower upkeep. Outdoor space is often a patio or a small entry strip rather than a full lot, with grounds maintained at the project level.
-
Walkable retail as the perk: the densest townhome blocks sit near Mountain View Village, so a Harmons, a Cinemark, and dozens of shops and restaurants are a short distance from the door.
-
Read the project, not just the unit: with attached homes the building and the project matter as much as the floor plan, both for daily living and for how the financing comes together. Confirm the details before you commit.
The local map
Where the townhomes actually are.
Riverton's attached product is not spread evenly across town. It concentrates on the newer west side, with the densest clusters near the retail core. Here is where to look.
The west bench near Mountain View Village
This is the center of gravity for Riverton townhomes. The new west bench between Bangerter Highway and the Mountain View Corridor carries the city's densest single-family and attached product, built on the former farm fringe, with the Mountain View Village retail and dining district at 13400 South as the draw.
Around the Mountain View Village core
The mixed-use district itself includes attached residential, including the 208-unit Village Lofts, so the blocks immediately around the open-air center hold some of the most walkable attached homes in the city, with retail and a 14-screen Cinemark a short stroll away.
The newer corridor edges
As you move along the Mountain View Corridor on the city's west edge, newer subdivisions mix smaller-lot single-family with townhome product. Lots are tight by design here, with the walkable retail and the newest systems as the trade for the yard.
The central band, occasionally
The 1990s-2000s subdivision fabric between Redwood Road and Bangerter is mostly detached single-family, but the occasional attached cluster surfaces. This middle band is closest to built-out, so new attached listings here are less common than out west.
Not the east river side
The oldest part of town along Redwood Road, near the Jordan River and the historic civic core, runs to larger legacy lots and detached homes, not townhomes. If an attached listing shows here it is the exception, so read it carefully.
New construction in the west
Builders working the west side have offered loft-style and townhome plans alongside detached homes. On a new attached build you can sometimes choose the plan before it is finished, if you are willing to wait, and builder and project names change, so always confirm what is actually selling.
Before you tour: what to actually check
The shared walls: stand in the unit and listen. Ask which walls are shared, how the building handles sound between units, and whether the home is an end unit with one shared wall or a middle unit with two.
What you maintain vs. what the project does: get a clear, written line on which exterior, roof, and grounds upkeep is yours and which is handled at the project level. The split is the whole point of buying attached, so know it exactly.
The financing path: attached product can finance differently from a detached house, and the project itself can affect which loans work. Loop me in early so we confirm the specific building works for your loan before you are under contract.
Parking and the garage: check whether the unit has a private garage, a driveway, or assigned spaces, and where guests park. On tight west-side lots parking is planned tightly, so see it in person.
Outdoor space and storage: townhomes trade yard for upkeep, so look hard at the patio, any private outdoor area, and where the snow gear, bikes, and seasonal storage actually go.
Secondary water and utilities: Riverton City provides culinary and secondary irrigation water, and utility setups differ in attached projects. Confirm how water, power from Rocky Mountain Power, and gas are metered and billed for the specific unit.
Want the townhome shortlist without the homework?
Tell me your budget, the part of Riverton you like, and whether a townhome near the Mountain View Village retail is the goal or just the more reachable price point. I will connect you with a trusted Riverton-area partner agent for the on-the-ground work and stay on the file for the homework and the financing, including the parts where an attached home finances differently from a detached one.
Selling a townhome in Riverton? The buyers reading this page want exactly that. List it with the Riverton-area partner agent I connect you with, and your home gets featured across MovingUtah, on the pages they are already reading.
Quick answers
Townhome shopping, answered.
Almost all of Riverton's attached townhome product sits on the newer west bench between Bangerter Highway and the Mountain View Corridor, with the densest clusters near the Mountain View Village retail and dining district at 13400 South. The mixed-use center even includes attached residential like the 208-unit Village Lofts. The older east river side and most of the central band are detached single-family, so a townhome there is the exception. The live listings above are the honest count on any given week.
Two reasons usually. First, cost: Riverton's typical home value has recently sat around $592,700 (U.S. Census ACS 2020-2024), a figure anchored by detached houses on full lots, and an attached townhome is often the more reachable entry under that. Second, upkeep and location: you trade the yard and accept shared walls in return for lower maintenance and, on the west bench, walkable retail a short distance from the door. If you would rather have a freestanding home, the single-story homes page is the better start.
It can, yes. Lenders and loan programs evaluate attached-product projects differently from a standalone house, and the project itself can affect which loans are available and how the appraisal comes together. This is general and it varies by project and by program, so the honest answer is that we look at the specific building together. That financing side is exactly what I stay on the file to handle while the local partner agent works the streets. Loop me in early and we confirm the building works for your loan before you are under contract.
Shared walls with neighbors on one or both sides, little to no private yard, and exterior and grounds upkeep handled at the project level rather than by you. That last one is the lock-and-leave appeal and the loss of control at the same time. The upside on the Riverton west bench is location: you are close to the Mountain View Village retail, a Cinemark, and dozens of shops and restaurants. If shared walls are a dealbreaker, start with the detached pages instead.
Generally the attached product comes in under the detached median, which is why a townhome is often the reachable way into a high-demand corner of the southwest valley. The typical Riverton home value has recently sat around $592,700 (U.S. Census ACS 2020-2024), and townhomes tend to overlap with the homes under $550,000 and homes under $650,000 price bands. The live listings above are the real answer on any given week.
Tell me the budget, the part of Riverton you like, and whether walkability to Mountain View Village matters, and I will connect you with a Riverton-area partner agent and flag matching listings as they go live. Because townhomes are a smaller slice of a mostly detached city, getting an early heads-up is the difference between touring the good ones and reading about them after they sell.